Closing The Trailer - Burley BARK RANGER Manual De Instrucciones Y Seguridad

Closing Your Trailer
1. Remove all contents from the interior and exterior of the
trailer, including the handlebar (see pg. 10).
2. Release frame latch by pulling the yellow slider back to
disengage the locking mechanism, and rotate upwards
(Figure 7).
3. From the rear of the trailer, depress and hold the right
and left frame buttons (Figure 8), and rotate the middle
frame member downwards until it snaps into place
(Figure 9).
4. Fold the rear frame down, followed by the front frame
(Figure 10).
NOTE: Damage to the mesh windows and trailer fabric can
occur if trailer is folded with wheels installed.
WARNING
Care must be taken when operating frame latch to avoid
pinching of fingers and hands.
ENG
6
Figure 7
Figure 9
®
Figure 8
Figure 10
PET TRAILERS