Connecting An External Printer (Optional); Connecting A Barcode Reader (Optional) - Olivetti Nettuna3000 Guía Rápida

CONNECTING AN EXTERNAL PRINTER (OPTIONAL)

If you want to use an external printer purchased separately (such as an "Olivetti
PR4 SL" or "Olivetti PRT100" model), verify if the printer connector is of serial or
USB type. According to your model, connect the printer to the USB connector A or to
the serial connector B.

CONNECTING A BARCODE READER (OPTIONAL)

If you want use a barcode reader purchased separately, check the type of connector
it uses (USB or serial). The Barcode readers supported can handle the following
codes: UPC A / UPC-E, EAN 13 / EAN 8, Code 39 (length 5-32). According to
your model, connect the Barcode Reader to the USB connector C or to the serial
connector D.
14