DJI ZENMUSE H20N Guia De Inicio Rapido página 6

Installation
1. Remove the gimbal cap and lens protector.
2. Align the white and red dots and insert the gimbal onto the Matrice 300 RTK aircraft. Rotate the gimbal
connector to the locked position.
1 2
Hold the aircraft firmly and steadily rotate the gimbal connector to attach and detach the gimbal.
Ensure the microSD card slot cover is firmly in place to prevent dust or moisture entering during usage or
transportation.
Camera Controls
Remote Controller
Adjust the gimbal's tilt using the left dial and adjust its pan by the right dial. Press the shutter button or
record button to take photos or record video. Toggle the 5D button vertically to adjust the zoom and
horizontally to adjust the EV value. The customizable button C1 can be used to recenter the gimbal, and
the customizable button C2 can be used to switch between the main and auxiliary screen.
1
2
4
1 1
1 3
1. Left Dial
2. Record Button
4
3. Shutter Button
3
4. Right Dial