Before Use; Operation; Cleaning And Maintenance - cecotec ForceSilence 560 Woodesk Manual De Instrucciones

• Use the fan in a well-ventilated area. While using, distance
of no less than 20 cm should be kept away from wall or
corner to ensure the air intakes.

2. BEFORE USE

1. Remove the nut (2) and the back grid fixing nut (4)
by turning anticlockwise both of them, then remove
the two pieces.
2. Place the back grid (5) with the handle on the top
part.
3. Place and firmly tighten the back grid fixing nut (4)
to fix the back grid (5).
4. Place the blades (3) on the central hub (6) until they
match the back grid fixing nut. (4).
5. Place the nut (2) shaft and turn it clockwise until
it is fixed.
6. Put the back (5) and front (1) grid together. Make sure the holes on each one match
perfectly and use the 3 closing clips to keep them safely attached.
7. Insert the fan (11) in the base (12) and screw with the nut (13).

3. OPERATION

1. To activate or stop oscillation, press the button or pull (7).
2. To adjust the direction of the fresh air, tilt the fan's head up or down.
3. You can adjust speed with the speed buttons:
0: Off / 1: Slow / 2: Medium / 3: Fast
4. Plug the power cord into a suitable power socket.

4. CLEANING AND MAINTENANCE

1. Always disconnect the appliance from the mains by switching it off and removing the plug
from the power outlet before cleaning.
2. It is advisable to use a neutral detergent and a soft cloth and to rub dry. Do not use solvents,
acidic detergents, petrol or alcohol etc., to clean the plastic components, as these could be
deformed or damaged.
3. Do not allow water to penetrate the motor during cleaning.
FORCESILENCE 560 WOODESK/570 STEELDESK/580 RETRODESK
ENGLISH
13