Installation Instructions - Teka RVI 20046 GBK Manual Del Usuario

Ocultar thumbs

Tabla de contenido

Idiomas disponibles

 Before Using Your Wine Cooler



Remove the exterior and interior packing.



Before connecting the Wine cooler to the power source, let it stand upright for approximately

2 hours. This will reduce the possibility of a malfunction in the cooling system from handling

during transportation.



Clean the interior surface with lukewarm water using a soft cloth.



This appliance is intended to be used in household and similar applications such as

– staff kitchen areas in shops, offices and other working environments;

– farm houses and by clients in hotels, motels and other residential type environments;

– bed and breakfast type environments;

– catering and similar non-retail applications.



When disposing your appliance, please choose an authorized disposal site.

 Installation of Your Wine Cooler



This appliance is designed to be for in column (fully recessed) (Refer to sticker location the

back of this appliance).



This appliance is intended to be used exclusively for the storage of wine.



Place your Wine cooler on a floor that is strong enough to support it when it is fully loaded.



This appliance is using flammability refrigerant. So never damage the cooling pipe work

during the transportation. Locate the Wine cooler away from direct sunlight and sources of

heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat

sources may increase electrical consumption. Extreme cold ambient temperatures may also

cause the unit not to perform properly.



Avoid locating the unit in moist areas.



Plug the Wine cooler into an exclusive, properly installed-grounded wall outlet. Do not under

any circumstances cut or remove the third (ground) prong from the power cord. Any questions

concerning power and/or grounding should be directed toward a certified electrician or an

authorized Products service center.

 Attention



Store wine in sealed bottles;



Do not overload the wine cooler;



Do not open the door unless necessary;



Do not cover shelves with aluminum foil or any other shelf material which may prevent air

circulation;



Should the Wine cooler be stored without use for long periods it is suggested, after a careful

cleaning, to leave the door ajar to allow air to circulate inside the wine cooler in order to avoid

possible formations of condensation, mold or odors.

 Ambient Room Temperature Limits

This appliance is designed to operate in ambient temperatures specified by its temperature class

marked on the rating plate.

Class

Extended Temperate

Temperate

Subtropical

Tropical

Replaceable (LED only) light source by a professional

This product contains a light source of energy efficiency class G.