Installation Instructions - Teka RVI 10024 GBK Manual Del Usuario

Ocultar thumbs

Tabla de contenido

Idiomas disponibles

 Before Using Your Wine Cooler



Remove the exterior and interior packing.



Before connecting the Wine cooler to the power source, let it stand upright for

approximately 2 hours. This will reduce the possibility of a malfunction in the cooling

system from handling during transportation.



Clean the interior surface with lukewarm water using a soft cloth.



When disposing your appliance, please choose an authorized disposal site.

 Installation of Your Wine Cooler



This appliance is designed to be for in column (fully recessed) (Refer to sticker

location the back of this appliance).



This appliance is intended to be used exclusively for the storage of wine.



Place your Wine cooler on a floor that is strong enough to support it when it is fully

loaded.



This appliance is using flammability refrigerant. So never damage the cooling pipe

work during the transportation. Locate the Wine cooler away from direct sunlight and

sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic

coating and heat sources may increase electrical consumption. Extreme cold

ambient temperatures may also cause the unit not to perform properly.



Avoid locating the unit in moist areas.



Plug the Wine cooler into an exclusive, properly installed-grounded wall outlet. Do

not under any circumstances cut or remove the third (ground) prong from the power

cord. Any questions concerning power and/or grounding should be directed toward a

certified electrician or an authorized Products service center.

 Attention



Store wine in sealed bottles;



Do not overload the wine cooler;



Do not open the door unless necessary;



Do not cover shelves with aluminum foil or any other shelf material which may

prevent air circulation;



Should the Wine cooler be stored without use for long periods it is suggested, after a

careful cleaning, to leave the door ajar to allow air to circulate inside the wine cooler

in order to avoid possible formations of condensation, mold or odors.

 Ambient Room Temperature Limits

This appliance is designed to operate in ambient temperatures specified by its temperature

class marked on the rating plate.

Class

Extended Temperate

Temperate

Subtropical

Tropical

Replaceable (LED only) light source by a professional

This product contains a light source of energy efficiency class G.