english
4. Safety Instructions
Only use in closed rooms for aquarium applications
Prior to dipping your hand into the aquarium water, disconnect all electronic devices installed
in the water from the mains.
It is imperative to disconnect the fi lter from the mains prior to opening it.
Burning danger! Be careful when touching the heating coil of devices with integrated heater.
The device's power cable cannot be replaced.
An external power cable or power supply unit must not be repaired.
In case of cable damage, the device must no longer be used.
Any damaged external power cables or power supply units must always be replaced.
Contact your specialist dealer or an EHEIM service center.
20 cm
During maintenance works, observe the risk of crushing fi ngers due to high magnetic forces.
The product is approved in accordance with the respective national regulations and
guidelines and complies with the EU standards.
All manuals and user guides at all-guides.com
For your own safety, we recommend to form a drip loop with the
connection cable to prevent any water running along the cable
from intruding into the socket.
When using a multiple socket or an external power supply unit,
position them atop the fi lter's power connection.
Take the erection height into account when selecting the device's
operation site. To assure optimum functional safety, observe a max.
clearance of 180 cm between the water surface and the fi lter bottom.
As a multitude of lacquers and polishes is used for wood processing, the
device legs may leave visible residues on furniture or parquet fl oors.
Therefore, never position the device on wood surfaces without a pad
underneath it.
Magnetic fi elds may generate electronic or mechanical interferences or
damage with these devices. This also applies to cardiac pacemakers.
The required safety clearances are specifi ed in the manuals of such
medical equipment.
7