Johnson Controls PG9200AX Manual Del Usuario página 17

Dimensions
Specifications
GENERAL
Range: 200 ft (60 m)
Detection method: Infrared beam interruption detection
Beam frequency selection: 4 channels
Interruption period: Variable between 50, 100, 250, and 500 msec
Power Source: Recommend: 3.6 V, 13.0 Ah LSH20 lithium batteries manufactured by SAFT.
Current draw: 810 µA T: 490 µA + R: 320 µA (at 77 °F (25 °C), 3.6 VDC)
Battery life: Transmitter: Approximately 3 years. Receiver: Approximately 5 years *
INDICATORS
Alarm Indicator (Receiver): Light on - Beam not received. Flickering Light - IR Beams not received sufficiently.
Light off - Beam received.
Power (Transmitter): Power ON: ON, Power OFF: OFF
Low battery: Voltage Reduction: blink
Operating temperature: -4°F to +140°F (-20°C to +60°C)
Operating ambient humidity: 95% (Max.)
Alignment angle: ±90° Horizontal, ±5° Vertical
Weight: 56.4 oz (1600 g) (total weight of transmitter and receiver, excluding accessories)
Waterproof rating: IP55
Frequency: 912-919 MHz 128/256 second intervals
Specifications and design are subject to change without prior notice.
* The battery life specification applies only when using recommended batteries. See Ordering Detector batteries.
Using other battery types may affect battery life expectancy or product performance.
Note: These devices are designed to detect an intruder and activate an alarm control panel. The devices are part of
a complete system, therefore the manufacturer cannot accept responsibility for any damages or other consequences
resulting from an intrusion.