Device Settings; Switch Functions - Johnson Controls PG9200AX Manual Del Usuario

Device settings

Callout Component
A Monitor jack (receiver only)
B Switches
C Receiver: Alarm indicator LED. Transmitter: Power LED
D Low battery LED
E View finder
F Vertical alignment dial
G Horizontal alignment dial
H 4-channel beam frequency selector

Switch functions

Warning: We do not recommend changing the default settings apart from the Battery saving timer. See Battery saving
timer for more information. Changing other default settings can cause the device to function incorrectly and increases
the chance of failure or false alarms.
Receiver
1 and 2: Beam interruption adjustment switch
3: Battery saving timer switch
4: Not used. Do not change the position of this switch.
5: N.C./N.O. selection switch
Transmitter
1: Battery saving timer switch
2: Not used. Do not change the position of this switch.
3: N.C./N.O. selection switch