Johnson Controls PG9200AX Manual Del Usuario página 5

Mounting
Callout
A
B
C
D
E
F
G
H
Caution: Completely install all components of the detector to comply with the IP55 standard requirements.
Description
Do not mount the device on an unstable surface
Do not mount the device on an unstable pole.
Do not mount the device near trees or other objects that may block the
beam.
Avoid mounting the receiver in direct sunlight. Sunlight can affect receiver
performance.
Do not mount the device where the infrared beam from a different model can
reach the receiver
Mount the device at a height between 0.7 m to 1 m (2.3 ft to 3.3 ft)
When mounting on a pole, the pole diameter should be 34 - 48 mm (1.34" -
1.89").
Mount the device at least 1 m (3.3 ft.) away from a wall or fence that is
parallel to the beam.