Premise; Safety Warnings; Warnings For The Installer; Warnings For The User - ChefLine TN40 Manual De Uso Y Mantenimiento

1 PREMISE

Dear Customer, first of all we thank you for choosing our product and congratulate you on your choice.
To allow you to make the most of your new oven, please carefully follow the instructions in this Manual.
The ovens referred to in this Manual have been designed to prepare pizzas, breads, focaccias, au gratin dishes and to
heat tray food.
The intended use and the configurations envisaged for these devices are the only ones allowed by the Manufacturer: do
not use the equipment in a manner that is inconsistent with the instructions provided.
The installation must be carried out exclusively by qualified personnel, able to guarantee the best operating and safety
conditions.

2 SAFETY WARNINGS

Warnings for the installer

Verify that the electrical connections for the oven comply with local, national and European regulations.
 Comply with the instructions provided in this Manual.
 Do not make haphazard electrical connections with temporary or uninsulated cables.
 Check that the grounding connection to the power system is efficient.
 Always use individual safety devices and other means of protection required by the law.

Warnings for the user

The environmental conditions of the location where the oven is installed must have the following characteristics:

Be dry;

Away from water sources and heat;

With adequate ventilation and lighting and compliant with the hygiene and safety standards required by current laws;

The floor must be flat and compact to facilitate thorough cleaning;

No obstacles of any kind should be placed in the immediate vicinity of the oven, which could affect its proper.
Furthermore, the user must:

Make sure that children do not approach the oven when it is operating;

Comply with the instructions provided in this Manual;

Do not remove or tamper with the oven safety devices;

Always pay utmost attention, i.e., to what you are doing and do not use the oven when you are distracted;

Comply with the instructions and warnings on the oven plates.
The plates are safety devices; therefore, they must always be perfectly legible. If they are damaged and illegible,
they must be replaced, once they have been requested from the Manufacturer.

Disconnect the power supply at the end of each use and before cleaning and maintenance operations.

Warnings for the maintenance technician

Comply with the instructions provided in this Manual:

Always use individual safety devices and other suitable means of protection.

Before starting any maintenance operation, make sure that the oven has cooled down.

If even one of the safety devices is turned off or not working, the oven should be considered non-functional.

Disconnect the power supply before working on electrical and electronic parts and connectors.
64