Program Selection On The Main Screen; Menu Items - ChefLine TN40 Manual De Uso Y Mantenimiento

Program selection on the main screen

In the main screen, the programs are visible as follows:
The empty box indicates that the manual program is in use.
Program 3 is in use.
Instead, when you are selecting the program using the navigation arrows (5 and 6), the box becomes full, as follows:
After 5 seconds, the program is automatically activated. It can also be saved by pressing ENTER.
Note on the navigation keys: when pressed on the main screen, a first press fills the box of the program in use, a second
press moves the box to select another program.

Menu items

PROGRAMS
Screen with the possibility to set 6 programs, each of which contains the parameters - UPPER TEMPERATURE
- LOWER TEMPERATURE
- CONVEYOR SPEED
The MANUAL program is not present, it remains only in the main screen, it keeps the set values memorized which will be
recalled every time you return from a program 1-6 to the manual mode.
PROGRAMMED ON/OFF FUNCTIONS
Possibility to set a switch-on time and a switch-off time for each day of the week.
The checked box indicates that the programmed power on is active for that particular day.
When only one day has the function activated, a symbol on the main screen that indicates its programming, the symbol
also remains on the standby tab.
Once the oven is switched on automatically, it is brought to a fixed and non-variable temperature of 140°C and 100% belt
speed, for safety and electrical consumption reasons.
DATE/HOUR
Date and time setting.
CONVEYOR DIRECTION
Set the conveyor direction.
Select the right arrow to move the conveyor clockwise, loading the dishes on the left and unloading them on the right; select
the left arrow to move the tape counterclockwise, loading the dishes on the right and unloading them on the left;
72