Li-Ion Battery Charge Status Display; Technical Data - Hilti SPN 6­-A22 Manual De Instrucciones

3.5

Li-ion battery charge status display

The charge status of the Li­ion battery is displayed after one of the two battery release buttons is pressed.
Status
4 LEDs light.
3 LEDs light.
2 LEDs light.
1 LED lights up.
1 LED flashes.
Indication of the charge status is not possible while the power tool is in operation or immediately
after operation. If the battery charge status LEDs flash, please refer to the information given in the
Troubleshooting section.
4

Technical data

The nibbler comes with the SPN­CN accessory tool as standard. The SPN­RN and SPN­RL accessory tools
are available as optional accessories.
Rated voltage
Weight including battery B22⁄8.0
Stroke rate at idle speed
Starting hole diameter
Smallest radius for curved cut-outs
Radius
Cutting track width
Permissible steel thickness, steel up to
400 N⁄mm²
Permissible steel thickness, steel up to
600 N⁄mm²
Permissible steel thickness, steel up to
800 N⁄mm²
Permissible material thickness, aluminum up to
250 N⁄mm²
Ambient temperature for operation
Storage temperature
4.1 Battery
Battery operating voltage
Ambient temperature for operation
6 English
Meaning
Charge status: 75 % to 100 %
Charge status: 50 % to 75 %
Charge status: 25 % to 50 %
Charge status: 10 % to 25 %
Charge status: < 10 %
SPN­CN SPN­RN
21.6 V 21.6 V
3.1 kg 3.0 kg
(6.8 lb) (6.6 lb)
620 /min ... 620 /min ...
1,370 /min 1,370 /min
17 mm 24 mm
(0.7 in) (0.9 in)
4.0 mm •/•
(0.16 in)
•/• 50 mm
(2.0 in)
8.0 mm 5.0 mm
(0.31 in) (0.20 in)
2.0 mm / 14 ga 2.0 mm / 14 ga
(0.08 in / 14 ga) (0.08 in / 14 ga)
1.5 mm / 16 ga 1.5 mm / 16 ga
(0.06 in / 16 ga) (0.06 in / 16 ga)
1.0 mm / 20 ga 1.0 mm / 20 ga
(0.04 in / 20 ga) (0.04 in / 20 ga)
2.5 mm / 10 ga 3.0 mm / 9 ga
(0.10 in / 10 ga) (0.12 in / 9 ga)
−17 ℃ ... 60 ℃ −17 ℃ ... 60 ℃
(1 ℉ ... 140 ℉) (1 ℉ ... 140 ℉)
−20 ℃ ... 70 ℃ −20 ℃ ... 70 ℃
(−4 ℉ ... (−4 ℉ ...
158 ℉) 158 ℉)
21.6 V
−17 ℃ ... 60 ℃
(1 ℉ ... 140 ℉)
2253587
*2253587*
SPN­RL
21.6 V
3.3 kg
(7.3 lb)
620 /min ...
1,370 /min
24 mm
(0.9 in)
•/•
50 mm
(2.0 in)
5.0 mm
(0.20 in)
2.0 mm / 14 ga
(0.08 in / 14 ga)
1.5 mm / 16 ga
(0.06 in / 16 ga)
1.0 mm / 20 ga
(0.04 in / 20 ga)
3.0 mm / 9 ga
(0.12 in / 9 ga)
−17 ℃ ... 60 ℃
(1 ℉ ... 140 ℉)
−20 ℃ ... 70 ℃
(−4 ℉ ...
158 ℉)