Status Indicator; Indication Of Battery Charge Status; Technical Data; Fastening Tool - Hilti BX 3-BT Manual De Instrucciones Original

To deactivate Bluetooth manually, press and hold down the on/off button for at least 5 seconds until the LED
shows blue twice.
When the battery is removed, no further data are transferred.
Bluetooth is not available in all markets.
3.4

Status indicator

The status indicator provides information about the status of the fastening tool.
Status
Off
The LED shows green.
The LED flashes green every 3 seconds.
The LED flashes steadily green.
The LED flashes red.
The LED shows red.
The LED flashes yellow.
3.5

Indication of battery charge status

When one of the battery release buttons is pressed, the display indicates the battery's state of charge.
Reliable indication of the charge status is not possible while a fastener is being driven or immediately
after a fastener is driven.
Status
All four LEDs show green.
Three LEDs show green.
Two LEDs show green.
One LED shows green.
One LED flashes green.
3.6 Items supplied
BX 3-BT fastening tool, X­FG B3 series fastener guide, operating instructions.
You can find other system products approved for your product at your local Hilti Center or online at:
www.hilti.com
4

Technical data

4.1

Fastening tool

Weight in accordance with EPTA Procedure 01
including battery
Threaded-stud length
Thread diameter
Compression stroke
Contact pressure
Application temperature (ambient temperature)
Application temperature, threaded studs
18 English
Printed: 20.09.2019 | Doc-Nr: PUB / 5514238 / 000 / 00
Meaning
The fastening tool is switched off
The fastening tool is switched on and ready for use
The fastening tool is in stand-by mode. Press the
nose of the tool against the working surface to
switch it on
The fastening tool is too hot or the battery has in-
sufficient power; see "Troubleshooting"
Malfunction; see "Troubleshooting"
Malfunction; see "Troubleshooting"
Bring the fastening tool to Hilti Service.
Meaning
Charge status is 75 % to 100 %.
Charge status is 50 % to 75 %.
Charge status is 25 % to 50 %.
Charge status is 10 % to 25 %.
Charge status is below 10 %.
B 22/2.6 Li-Ion (02) 4.0 kg
B 22/3.0 Li-Ion (01) 4.1 kg
B 22/4.0 Li-Ion 4.2 kg
B 22/5.2 Li-Ion (01) 4.3 kg
B 22/8.0 Li-Ion 4.6 kg
31 mm
8 mm ... 10 mm
12 mm
50 N ... 70 N
−15 ℃ ... 50 ℃
−10 ℃ ... 50 ℃
2209576
*2209576*