Dusting Brush; Crevice Tool - Titan T9200 Manual Del Usuario

DUSTING BRUSH

The dusting brush is for use on various surfaces. See ATTACHMENT USE TABLE (page
22).
To remove the brush tool, release by pressing the tab and lifting off the holder.
Tab
To attach, insert the tab on holder into the slot on the brush tool and press until the tab
snaps into place.

CREVICE TOOL

Remove the crevice tool by pulling from flat end of the tool.
To attach the crevice tool to the handle:
1. Place the round end of the crevice tool onto the tab on the handle as shown.
Tab
-21-