Cleaning, Sanitation and Maintenance
Cleaning, Sanitation and Maintenance
This ice system requires three types of
maintenance:
•
Remove the build up of mineral scale from
the ice machine's water system and sensors.
•
Sanitize the ice machine's water system and
the ice storage bin or dispenser.
•
Clean the remote air cooled condenser
It is the User's responsibility to keep the ice
machine and ice storage bin in a sanitary condition.
Sanitize the ice storage bin as frequently as local
health codes require, and every time the ice
machine is cleaned and sanitized.
The ice machine's water system should be cleaned and sanitized a minimum of twice per year.
This is critical to the proper operation of the ice machine. Contact your local authorized service
agent for water system cleaning.
Exterior Panels
The front and side panels are durable
stainless steel. Fingerprints, dust and
grease will require cleaning with a
good quality stainless steel cleaner.
Water filters
If the machine has been connected to
water filters, check the cartridges for
the date they were replaced or for the
pressure on the gauge. Change
cartridges if they've been installed
more than 6 months or if the pressure
drops too much when the ice machine
fills with water.
Remote condenser
Contact your local authorized service
agent for water system and condenser
cleaning.
Remote Condenser Models - User Manual
May 2007
Page 5
C0522 through C1030