C0522 through C1030
Remote Condenser Models - User Manual
Options and Other Information
Optional Advanced Feature Board (KSB)
When this option is present there is an additional
display panel in the area below the main control
board. It is not visible when the front panel is on.
The Advanced Feature Board's features include:
•
Seven day programmable ice level setting
when used with the optional Ultrasonic ice
level control
•
Recording of machine operation, including
cycle time.
•
Calculation of average cycle time
•
Recall of malfunctions with the time they
occurred.
™
SmartBoard
Advanced Feature Control
See Instructions for Available Features
34
ESC
SEL
ENTER
02-4293-01 Rev A.
May 2007
Page 4
Ice
The cuber drops ice in large sections. That ice will
break up into random parts as it falls into the bin,
but some large sections may remain on top of the
ice in the bin. When removing ice, tap the groups of
ice with an ice scoop to separate them into smaller
units. In a dispenser, this ice will break up into
mostly individual cubes as the dispense
mechanism moves the ice.
Heat
Most heat is exhausted at the remote condenser.
The ice machine should not generate significant
heat.
Noise
The ice machine will make noise when it is in ice
making mode. The compressor and water pump all
produce some sound. It is also normal to hear
some cracking just before the harvest cycle begins.
In addition, during the harvest cycle the harvest
assist solenoid will click twice as it pushes the ice
out and returns to its normal position. The ice
harvests as a unit or slab, which makes some noise
when it impacts the bin or dispenser. These noises
are all normal for this machine.