Cleaning, Sanitation and Maintenance
Cleaning, Sanitation and Maintenance
This ice system requires three types of
maintenance:
•
Remove the build up of mineral scale from
the ice machine's water system and sensors.
•
Sanitize the ice machine's water system and
the ice storage bin or dispenser.
•
Clean the remote air cooled condenser
It is the User's responsibility to keep the ice
machine and ice storage bin in a sanitary condition.
Sanitize the ice storage bin as frequently as local
health codes require, and every time the ice
machine is cleaned and sanitized.
The ice machine's water system should be cleaned and sanitized a minimum of twice per year.
This is critical to the proper operation of the ice machine. Contact your local authorized service
agent for water system cleaning.
Exterior Panels
The front and side panels are durable stainless
steel. Fingerprints, dust and grease will require
cleaning with a good quality stainless steel cleaner.
Water filters
If the machine has been connected to water filters,
check the cartridges for the date they were
replaced or for the pressure on the gauge. Change
cartridges if they've been installed more than 6
months or if the pressure drops too much when the
ice machine fills with water.
Remote condenser
Contact your local authorized service agent for
water system cleaning.
Remote Condenser Models - Installation Manual
June 2007
Page 21
C0522 through C1030