Remote Controller (Top Panel) - Tascam CD-X1700 Manual Del Usuario

English

2-3. Remote Controller (Top Panel)

0 OPEN key
Opens and closes the appropriate tray.
NOTE
... These keys cannot be used when direct
mode (Preset menu: page 23) is off and
a disc is being played back.
q PLAY MODE / PGM key
Selects the play mode, either continuous play (all
play), single play (1 track play), or programmed
play.
Continuous play:
Single play:
Programmed play:
Pressing and holding the TIME/ENTER/SHIFT
key while pressing the PLAY MODE key, enters
program edit mode. (∑ page 21)
w TIME/ENTER / SHIFT key
Selects the time display mode, either elapsed,
remain or total remain.
ELAPSED: Elapsed time will show in the
numerical portion in display, but no
additional indicator will light.
8
TASCAM CD-X1700 DUAL CD PLAYER
No indication in the
LCD
SINGLE indicator in the
LCD will light
PROGRAM indicator in
the LCD will light
2. Functions and Controls
REMAIN: REMAIN indicator in the LCD will
light
TOTAL REMAIN: The track number display area
shows the number of tracks of
inserted disc, however, for 5 seconds
in the end of track, the current track
number flashes and for 5 seconds in
the beginning of the track, the
current track number lights.
Another function of this key is the modifier key
(SHIFT function). Holding SHIFT while pressing
another key performs the following functions;
SHIFT + PLAY MODE:
SHIFT + FLASH:
SHIFT + SET:
SHIFT + TEMPO:
SHIFT + BEND -:
SHIFT + BEND +:
SHIFT + TAP:
SHIFT + Jog Wheel:
SHIFT + B:
SHIFT + CUE:
e LCD
Displays visual feedback for CD-X1700 functions
r TAP / DISPLAY key
Sets the tempo in BPM by tapping this key. When
you press this key, the parameter counter mode
momentarily changes to TAP BPM display mode.
(∑ page 14)
Program Edit
Track memory Recall
Track memory
Memory bank select
Auto Cue on/off
Auto Ready on/off
Parameter display select
Preset
Loop end point edit
Select the CUE key's
operation