Before Switching On; Electrical Connection - Jocel JCV-380LNFI Manual De Instrucciones

Before plugging in YOU MUST
Check that you have a socket which is compatible with the plug supplied with the
Fridge/Freezer.

Before switching on!

DO NOT SWITCH ON UNTIL FOUR HOURS AFTER MOVING THE FRIDGE/FREEZER.
The coolant fluid needs time to settle. If the appliance is switched off at any time, wait 30
minutes before switching back on to allow the coolant fluid to settle.
Before filling your Fridge/Freezer
Before storing foods in your Fridge/Freezer, turn the Fridge/Freezer on and wait for 24
hours, to make sure it is working properly and to allow the Fridge/Freezer to fail to the
correct temperature.

Electrical Connection

Improper use of the grounded plug can result in the risk of electrical shock. If the power
cord is damaged, have it replaced by an authorized service center.
This refrigerator should be properly grounded for your
This refrigerator requires a standard 220 -240V A.C. ~/50Hz electrical outlet with
three-prong ground.
This refrigerator is not designed to be used with an inverter.
The cord should be secured behind the refrigerator and not left exposed or dangling to
prevent accidental injury.
Never unplug the refrigerator by pulling the power cord. Always grip the plug firmly and
pull straight out from the receptacle.
Do not use an extension cord with this appliance. If the power cord is too short, have a
qualified electrician or service technician install an outlet near the appliance. Use of an
extension cord can negatively affect the performance of the unit.
WARNING
-37-