SEVERIN SV 2451 Instrucciones De Uso página 18

using the +/- buttons (up to 99 hours).
∙ Press the button again to set the
minutes (up to 59).
∙ Start the cooking process by pressing
the button.
∙ The light ring flashes blue. The
top display shows the actual water
temperature and the bottom display
shows the target temperature.
∙ Once the preset temperature has been
reached, the appliance emits beeps and
the blue control ring glows steadily.
∙ After the set time has elapsed, the
appliance emits beeps and switches off.
∙ Keep the on/off button pressed for
more than two seconds to interrupt
the cooking process or to switch off
the appliance.
∙ Always remove the plug from the wall
socket after use; allow sufficient time
for the appliance to cool down before
pouring out the water and starting the
cleaning process.
∙ HINT:
During cooking, you may notice small
eddies in the water. This is harmless,
but may be stopped by briefly
inserting a wooden spoon.
Changing temperature display to
degrees Fahrenheit (°F)
Keep the button pressed for two
seconds to switch the temperature display
between degrees Celsius (°C) and degrees
Fahrenheit (°F).
18