Elcometer 204 Guia Del Usuario página 12

R
10 SPARES & ACCESSORIES (continued)
10.3 ULTRASONIC COUPLANT
For the gauge to work correctly, there must
be no air gap between the transducer and the
surface of the material being measured. This
is achieved by using a couplant.
A 120ml (4fl oz) bottle of couplant is supplied
as standard with each gauge, other sizes are
available to purchase separately.
Description
120ml (4fl oz)
120ml (4fl oz) - pack of 5
300ml (10fl oz)
500ml (17fl oz)
3.8l (1 US Gallon)
High Temperature; 60ml (2fl oz)
High Temperature; 60ml (2fl oz) - pack of 2
For use with high temperature transducers up to 398°C (750°F) - see
Section 10.1 'Transducers' on page en-8.
10.4 TRANSDUCER ADAPTOR
This adaptor allows dual element,
'non-intelligent' transducers from
Elcometer - see Section 10.1
'Transducers' on page en-8 - and other
manufacturers' transducers with Lemo
connectors, to be used with the gauge.
Simply plug the adaptor into the transducer connection point at the
base of the gauge to connect any 'non-intelligent', dual element
transducer and follow the on-screen instructions.
Description
Dual Element Transducer Adaptor
en-11
All manuals and user guides at all-guides.com
Sales Part Number
T92015701
T92015701-5
T92024034-7
T92024034-8
T92024034-3
T92024034-9
T92024034- 10
Sales Part Number
T92024911
www.elcometer.com