Qlogic QME8242 Guia Del Usuario página 110

iSCSI Configuration Using Fast!UTIL: QLogic QME8242 Mezzanine Card User's Guide
2. On the Options menu, select Configuration Settings.
3. On the Configuration Settings menu, select Host Adapter Settings.
The Host Adapter Settings window opens as shown in
Figure 2. Fast!UTIL: Host Adapter Settings Window
a. Select Initiator IP Settings, and then specify the initiator IP address, subnet, and gateway as needed.
b. (Optional) Specify the Initiator iSCSI Name (IQN). This option is not dependent upon DHCP.
4. On the Configuration Settings menu, select iSCSI Boot Settings to configure the target settings shown in
Figure 3. Fast!UTIL: iSCSI Boot Settings Window
file:///T|/htdocs/NETWORK/QLogic/71922/en/fastutil.htm[9/26/2012 4:26:21 PM]
All manuals and user guides at all-guides.com
Figure 2.
Figure 3.