Qlogic QME8242 Guia Del Usuario página 89

User Diagnostics for Windows NIC Driver Management Applications: QLogic QME8242 Mezzanine Card User's Guide
CR_NIU_MODE
CR_PHY
CR_ERRCNT
Hardware HW_TEST_OK
HW_DMA_BZ_0
HW_DMA_BZ_1
HW_DMA_BZ_2
HW_DMA_BZ_3
HW_SRE_PBI_HALT
HW_SRE_L1IPQ
HW_SRE_L2IPQ
HW_SRE_FREEBUF
HW_IPQ
HW_PQ_W_PAUSE
HW_PQ_W_FULL
HW_IFQ_W_PAUSE
HW_IFQ_W_FULL
HW_MEN_BP_TOUT
HW_DOWN_BP_TOUT
HW_FBUFF_POOL_WM
HW_PBUF_ERR
HW_PBUF_ERR
HW_FM_MSG_HDR
HW_FM_MSG
HW_EPG_CTRL_Q
HW_EPG_MSG_BUF
HW_EPG_QREAD_TOUT
HW_EPG_QWRITE_TOUT
HW_EPG_CQ_W_FULL
HW_EPG_MSG_CHKSM
HW_EPG_MTLQ_TOUT
HW_PEG0
HW_PEG1
HW_PEG2
HW_PEG3
file:///T|/htdocs/NETWORK/QLogic/71922/en/diag_win.htm[9/26/2012 4:26:06 PM]
All manuals and user guides at all-guides.com
Network interface unit (NIU) error
Physical layer (PHY) error
Control register error count
Hardware test has passed
DMA channel 0 is busy
DMA channel 1 is busy
DMA channel 2 is busy
DMA channel 3 is busy
Segmentation and Reassembly Engine currently halted
Segmentation and Reassembly Engine currently paused
due to L1 IPQ discard failure
Segmentation and Reassembly Engine currently paused
due to L2 IPQ discard failure
Segmentation and Reassembly Engine free buffer list is
currently empty
IPQ is currently not empty
PQ write pause previously detected
PQ write full previously detected
IFQ write pause previously detected
IFQ write full previously detected
Memory backpressure timeout previously detected
Downstream backpressure timeout previously detected
Free buffer pool low watermark previously detected
Packet buffer error previously detected
Packet buffer error previously detected
FM message header error previously detected
FM message error previously detected
Egress packet generator (EPG) control queue is backed
up
EPG message buffer error
EPG read queue timeout
EPG write queue timeout
EPG completion queue write full
Egress packet generator (EPG) message checksum error
EPG MTL queue fetch timeout
Peg 0 is not used
Peg 1 is not used
Peg 2 is not used
Peg 3 is not used