Qlogic QME8242 Guia Del Usuario página 64

Windows NIC Driver Management Applications: QLogic QME8242 Mezzanine Card User's Guide
Port_Alias
Port_Physical_MAC_Alias
Port_LAA_MAC_Alias
You can change the variables listed in
states. To determine which ones can be changed, use the -c keyword.
Table 1. Port Adapter Variables and Values
Variable
Checksum_Offload_Enable
IPv4_Checksum_Offload_Enable
IPv4_TCP_Checksum_Offload_Enable
IPv6_TCP_Checksum_Offload_Enable
IPv4_UDP_Checksum_Offload_Enable
IPv6_UDP_Checksum_Offload_Enable
Large_Send_Offload_Enable
IPv4_Large_Send_Offload_v1_Enable
IPv4_Large_Send_Offload_v2_Enable
IPv6_Large_Send_Offload_v2_Enable
Receive_Side_Scaling_Enable
Header_Data_Split_Enable
Jumbo_Frames_MTU_9000_Enable
Jumbo_Frames_MTU_9000_Enable_Rx on, off
Jumbo_Frames_MTU_9000_Enable_Tx
LOCAL_Administered_Address_MAC
Port_Wake_On_LAN_Option
VLAN_ID
To set the QME8242 configuration alias, issue the following command:
qaucli -nic -nh [cna_port_inst] <config_name|config_alias> <value> [<config_name|config_alias>
<value>]
Please read all restrictions and
Back to Contents Page
file:///T|/htdocs/NETWORK/QLogic/71922/en/windrivr.htm[9/26/2012 4:25:48 PM]
All manuals and user guides at all-guides.com
Table 1; however, some variables cannot be changed on specific OSs or configuration
Values
on, off
off, Rx, Tx, RxTx
off, Rx, Tx, RxTx
off, Rx, Tx, RxTx
off, Rx, Tx, RxTx
off, Rx, Tx, RxTx
on, off
on, off
on, off
on, off
on, off
on, off
on, off
on, off
xx:xx:xx:xx:xx:xx
0=Disabled, 1=Wake on Magic Frame
1..4094
disclaimers.