Hardware And Software Requirements; Safety Precautions; Pre-Installation Checklist - Qlogic QME8242 Guia Del Usuario

Hardware Installation: QLogic QME8242 Mezzanine Card User's Guide
Back to Contents Page
Hardware Installation: QLogic QME8242 Mezzanine Card User's
Guide
Overview

Hardware and Software Requirements

Safety Precautions

Pre-Installation Checklist

Installing the Adapter
Connecting to the Network
Overview
This section provides the hardware and software requirements, safety precautions, a pre-installation checklist, procedures for
installing the adapter and connecting it to the network, and a description of the indicators for network and link activity.
Hardware and Software Requirements
Before you install the QME8242, verify that your system meets the following hardware and software requirements.
Hardware: For port and slot assignments, refer to the blade and M1000e chassis diagram in the Dell PowerEdge
M1000e Systems Configuration Guide for the blade and chassis.
Software: For information on the supported operating systems, firmware versions, adapter drivers, and utilities, refer
to the product release notes.
Safety Precautions
CAUTION: The adapter is being installed in a system that operates with voltages that can be lethal. Before
you open the case of your system, observe the following precautions to protect yourself and to prevent
damage to the system components.
Remove any metallic objects or jewelry from your hands and wrists.
Make sure to use only insulated or non-conducting tools.
Before you touch internal components, verify that the system is powered OFF and is unplugged.
Install or remove adapters in a static-free environment. The use of a properly grounded wrist strap or other personal
antistatic devices and an antistatic mat is strongly recommended.
Pre-Installation Checklist
1. Verify that your system meets the hardware and software requirements listed in
2. Verify that your system is using the latest BIOS.
NOTE: If you acquired the adapter software on a disk or from the Dell support website (http://support.dell.com),
verify the path to the adapter driver files.
3. Check the adapter for visible signs of damage. Never attempt to install a damaged adapter.
file:///T|/htdocs/NETWORK/QLogic/71922/en/install.htm[9/26/2012 4:25:17 PM]
All manuals and user guides at all-guides.com
Hardware and Software Requirements.