Anti-Frost Mode - Jocel JCT007452 Manual De Instrucciones

TIMING AND TEMPERATURE SETTING
1. TIMER
First click on the time and temperature keys two times, the temperature
function is open, the temperature began to flicker, Press "+" or "-" key to set
the temperature (set temperature must be greater than the current
temperature)。Press the timer button, each time the time is increased by 1
hour, when the timer time is 24:00, press the timer button, then the function
is turned off, when the timer function is set, the timer countdown starts in 5
seconds, and after the timer is over, it enters standby mode;
2. TEMPERATURE
Internal temperature is displayed every time the appliance is started up. The
temperature can be set when the appliance is in stand-by or heating. When
the room temperature reaches the set level, the high temperature power
stops and the low temperature power remains active. When room
temperature is 2 degrees over the set temperature, both the high and lower
temperature powers will stop operating. The machine will begin operating
again only when temperature decreases 2 degrees with respect to the set
temperature. The temperature regulation range is 5°C-37°C.
MODE
• Press "4-mode" to regulate low 1000W /1300W/2300W/ANTI-FROST
temperature power.
FAN
• Press the fan to open the key, you can open the fan or turn off the fan (on
the screen fan icon is light fan, Figure off the wind organ);

ANTI-FROST MODE

• In the standby mode, the room temperature is lower than 5°C, and
automatically enters the High-grade (2300W) heating mode. When the
room temperature reaches 9°C, the heating is turned off to standby,
followed by cycling.
33