Light Sensor - Vimar ELVOX ECG3 Manual Para El Conexionado Y El Uso

4.3 Wind sensor electrical connection
Terminal number Description
10 Wind sensor input (IN3)
11 Common (COM)
The trimmer TR1 sets the wind sensor trip threshold. Exceeding the threshold is indicated by the red LED DL1 flashing. 5 seconds after the threshold has
been exceeded the control unit will send the command to the motor.
4.4 Light sensor electrical connection
Terminal number Description
12 Light sensor input (IN4)
14
Positive +12Vdc ( +12v)
The trimmer inside the sensor sets the light sensor trip threshold. Exceeding the threshold is indicated by the green LED DL1 flashing. 60 seconds after the
threshold has been exceeded the control unit will send the command to the motor. NB: It is necessary to respect the polarities.
18
All manuals and user guides at all-guides.com
WIND SENSOR
REED CONTACT

LIGHT SENSOR

12V 4...20mA
EN