SHERCO 125 ST Manual Del Propietário página 78

MAINTENANCE PROCESSES
Replacing the blinker bulb
A
B
78
WARNING
Conduct this operation with the ignition off.
Disassembly:
- Remove screw , located on the back.
A
- Push on bulb and turn it left.
B
- Remove the bulb by pulling up.
Bulb type: 12V R10W
Reassembly:
- Conduct disassembly steps in reverse.
When assembling, correctly place the lens flange.
TIP
Dispose of the used bulb in a suitable location for recycling.