SHERCO 125 ST Manual Del Propietário página 81

MAINTENANCE PROCESSES
Checking and adding clutch fluid
A
Checking and adding rear brake fluid
The clutch fluid tank is above the handle.
To properly inspect, place the motorcycle in vertical
position.
To add:
- Remove the two
- Remove the inner seal.
- Fill with fluid.
Clutch fluid type: Mineral.
The clutch fluid level should be between 3 and 4 mm
from the upper lip.
The rear brake fluid tank is located next to the
A
mechanical start-up lever.
WARNING
To properly inspect, place the motorcycle in vertical position.
To add:
- Remove the threaded cap from tank
- Remove the inner seal and the pressure ring.
- Fill with fluid.
B
Brake fluid type: DOT 4.
WARNING
The brake fluid level should be between the marks MINI and
B
MAXI .
screws from the tank cover.
A
.
A
81