Replacing The Shock Absorber Spring - SHERCO 125 ST Manual Del Propietário

MAINTENANCE PROCESSES

Replacing the shock absorber spring

A
D B
C D
94
E F
Disassembling the shock absorber spring.
- Place the motorcycle on a tripod.
- Remove the air filter housing.
- Disassemble the fuel tank.
- Remove screw
A
absorber.
- Remove muffler support screw
- Remove nut from the shock absorber head
C
screw.
- Remove muffler support
- Remove shock absorber head screw
- Remove the shock absorber upward, then toward
the left.
- Once the shock absorber is removed, loosen
locknut as far as it will go.
G
- Loosen adjustment nut
- Press on the spring and remove clip
- Remove ring .
J
- Remove the spring and replace it with the spring
adapted to the pilot's weight.
See the table below:
Pilot weight: 60-65 kg
Pilot weight: 75-80 kg
Pilot weight: 80-85 kg
from the foot of the shock
.
B
, as well as strut .
D
.
F
as far as it will go.
H
.
I
65 Nmm Ref : 8408
70 Nmm Ref : 8409
72.5 Nmm Ref : 8410
E