SHERCO 125 ST Manual Del Propietário página 82

MAINTENANCE PROCESSES
Purging the rear brake fluid
WARNING
Place a rag under the drainer to collect the fluid.
Brake fluid is highly corrosive. All leftover fluid in contact with motorcycle parts must be eliminated.
82
To drain rear brake fluid:
A
- Remove the cover from the tank (see previous
section).
C
- Remove the black protective cap
- Press on the rear brake handle
releasing it.
- Slightly loosen the protected device
the black drain cap located next to the hose
attachment.
- Repeat the operation several times until the air
is drained from the circuit.
- Place the black protective cap
B
- Put the seal and lid back on the tank.
.
A
without
B
with
C
.
A