Technical Data - Dexter 20VRPS2-180.1 Manual De Instrucciones

8. TECHNICAL DATA

MODEL
RATED VOLTAGE
NO LOAD STROKE RATE n0
STROKE LENGHT
MAX. CUTTING DEPTH
IN WOOD
IN ALUMINIUM
IN METAL
WEIGHT
COMPATIBILITIES WITH BATTERIES
COMPATIBILITIES WITH CHARGERS
SOUND PRESSURE L
PA
SOUND POWER L
WA
UNCERTAINTY K , K
PA WA
VIBRATION a
B (board):
h,
VIBRATION a
WB (Wood beam):
h
UNCERTAINTY K
• The declared total vibration value (s) and the declared emission value (s) sound have been measured in accordance with a standard test method
and can be used to compare tools;
• The declared total vibration value (s) and the declared emission value (s) sound can also be used in a preliminary exposure assessment.
tool, in particular the type of workpiece; and it is necessary to identify the safety measures intended to protect the operator who are based on
an estimate of exposure under actual conditions of use (in taking into account all parts of the maneuver cycle, such as the times when the tool
This tool may cause hand-arm vibration syndrome if its use is not adequately managed. Helping to minimise your vibration and noise exposure
risk :
• Always use sharp chisels, drills and blades.
• Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate).
• If the tool is to be used regularly then invest in anti vibration and noise accessories.
• Plan your work schedule to spread any high vibration tool use across a number of days.
It's recommended to wear ear protection during operation with this machine
9. OPERATION
A. POWER SWITCH AND LOCK-OFF BUTTON
The required stroke rate is dependent on the material and the work conditions and can be determined using practical tests.
It is recommended that you reduce the stroke rate when placingthe saw blade on the workpiece and when sawing plastic and aluminium.
Remove the saw blade with gloves and let the power tool run at the maximum stroke rate for around three minutes to cool down.
20VRPS2-180.1
18V d.c.(Max. 20V d.c.)
0-3000/min
22 mm
180 mm
19 mm
5 mm
1,8 kg
20VBA2-25.1:2.5Ah Li-ION battery pack - 20VBA2-50.1:5.0Ah Li-ION battery pack
20VBA2-25.11:2.5Ah Li-ION battery pack - 20VBA2-50.11:5.0Ah Li-ION battery pack
Model no:20VCH1-3A.1-Input:100-240V~ 50-60Hz,75W-Output:21V d.c. 3A
Model no:20VCH2-6A.1-Input:100-240V~ 50-60Hz,150W-Output:21V d.c. 6A
86.6 dB(A)
97.6 dB(A)
5 dB(A)
73
ys of using the
ower tool,
ly adjust the
the stroke rate.
FR
ES
PT
IT
EL
PL
UA
RO
EN