Switching The Speaker On/Off; Pairing The Speaker With A Bluetooth; Device - Silvercrest SLBP 5 A1 Instrucciones De Uso

ATTENTION
► When using the device in water, make sure that the surface of the
device is not submerged for long periods of time. Extended or repeated
submersion can damage the device.
Switching the speaker on/off
♦ Press and hold the
speaker on and activate the Bluetooth
a beep and LED 1
flashes alternately blue and orange. The speaker is in pairing mode.
♦ Press and hold the
speaker off and deactivate the Bluetooth
a beep and LED 1

Pairing the speaker with a Bluetooth

Before you can use the speaker for music playback via Bluetooth
you must pair it with a compatible Bluetooth
♦ Press and hold the
speaker on and activate the Bluetooth
beep and LED 1
flashes alternately blue and orange.
♦ Set the Bluetooth
devices. A detailed description of how to do this can be found in the
operating manual for your Bluetooth
SLBP 5 A1
q
button
0
flashes orange twice. Afterwards, LED 1
q
button
0
flashes orange twice.
q
button
0
flashes orange twice. Afterwards, LED 1
playback device so that it scans for Bluetooth
®
for about 2 seconds to turn the
function. You will hear
®
for about 2 seconds to turn the
function. You will hear
®
®

device

playback device.
®
for about 2 seconds to turn the
function. You will hear a
®
playback device.
®
0
,
®
0
GB │ IE │
15
®
■