SilverCrest SSZ 500 A1
8.2.3 Operation
Warning!
Make sure the power cable is not in your working area. Otherwise, you could accidentally
pull on it and tip over the Smoothie Maker or cause the motor unit (2) to fall off the
multifunctional container (6).
The smoothie maker can only be switched on once the motor unit (2) is properly locked into
position on the lid (3).
Warning!
Hold the motor unit (2) in one hand and the multifunctional container (6) in the other when
you operate the unit.
1.
Connect the power cable plug to a live mains socket.
2.
Close the flap on the spout on the front of the lid (3).
3.
Hold the motor unit (2) to keep it in place and press the on/off pushbutton (1).
Warning!
Note the short-time duty (KB time). See the technical specifications on page 27.
4.
Release the on/off pushbutton (1) to switch off the Smoothie Maker.
Risk of injury
The cutting blades (5) continue to turn immediately after being switched off. Wait for the
cutting blades (5) to come to a complete standstill before removing the motor unit (2), opening
the multifunctional container (6) or taking other steps.
5.
Once you have finished preparation, unplug the mains plug from the mains socket.
6.
Remove the motor unit (2) from the multifunctional container (6).
7.
Remove the food. If you have prepared liquids (e.g. milkshakes), you can open the flap of the spout
on the multifunctional container (6) and pour out the contents. For firmer foods, remove the lid (3)
and empty the multifunctional container (6). You can use a scraper, for example.
Risk of injury
The cutting blades (5) are extremely sharp. Be very careful when handling the cutting blades
(5).
8.
Clean the lid (3), cutting blades (5) and multifunctional container (6). For more on this, please refer
to the "Maintenance/cleaning" section on page 41.
40 - English