Bresser MyTime iO Instrucciones De Uso página 7

Ocultar thumbs Ver también para MyTime iO:
Tabla de contenido

Publicidad

ABOUT ThIS INSTRUCTION mANUAL
These operating instructions are to be considered
a component of the device. Please read the
safety instructions and the operating instructions
carefully before use. Keep these instructions for
renewed use at a later date. When the device is sold
or given to someone else, the instruction manual must
be provided to the new owner/user of the product.
This product is intended only for private use.
GENERAL WARNINGS
ChOKING hAZARD!
Keep packaging material, like plastic bags and rubber
bands, out of the reach of children, as these materials
pose a choking hazard.
RISK of ELECTRIC ShOCK!
This device contains electronic components that
operate via a power source (batteries). Children should
only use the device under adult supervision. Only use
the device as described in the manual; otherwise, you
run the risk of an electric shock.
RISK of FIRE/EXPLOSION!
Do not expose the device to high temperatures. Use
only the recommended batteries. Do not short-circuit
the device or batteries, or throw them into a fire.
Excessive heat or improper handling could trigger a
short-circuit, a fire or an explosion!
NOTE!
Do not immerse the unit in water.
Do not subject the unit to excessive force, shock, dust,
extreme temperature or high humidity, which may result
in malfunction, shorter electronic life span, damaged
batteries and distorted parts.
Do not disassemble the device. In the event of a defect,
please contact your dealer. The dealer will contact
the Service Centre and can send the device in to be
repaired, if necessary.
Use only the recommended batteries. Always replace
weak or empty batteries with a new, complete set of
batteries at full capacity. Do not use batteries from
different brands or with different capacities. Remove
the batteries from the unit if it has not been used for
a long time.
The manufacturer is not liable for damage related to
improperly installed batteries!
GENERAL INFORmATION
This item is available in the following variants. The
functions and technical data are the same for both
models. They only differ in its design/in its colour.
Model 80-20210 GYE 000:
MyTime iO Wall Clock, silver/white
Model 80-20210 CM3 000:
MyTime iO Wall Clock, silver/black
SCOPE OF DELIvERy
Wall clock (A), Remote sensor (B), Instruction manual
Required batteries: 3 x 1.5V battery (Size AA/LR6)
and 2 x 1.5V battery (Size AAA/LR03)
Batteries not included with purchase.
PARTS OvERvIEW
Wall clock (Fig. 2)
A. Locking pin
1. Dial plate
2. Clock hands (hours, minutes, seconds)
3. Humidity display (indoor)
4. Temperature display (indoor)
5. Temperature display (outdoor)
6. Wall mount
7. Battery compartment 1 (Clock)
8. Battery compartment 2 (Temp. and humidity display)
9. M.SET button
10. RESET button
11. REC button
12. °C/°F/DOWN button
13. CH/UP button
Remote sensor (Fig. 3)
14. Function light
15. Wall mount
16. Battery compartment
17. Table stand (fold-out)
GETTING STARTED/POWER SUPPLy
NOTE!
Note the right order before operating the device for the
first time or when replacing the batteries. Make sure
to place the batteries strictly according to the right
polarities (+/-) as shown in the battery compartment.
1. Remove the locking pin (A) from the clockwork.
The clock can be operated only after the pin has
been removed.
2. Remove the cover from the wall clock battery
compartment 2 (8).
(Fig. 1)
DE
GB
FR
IT
ES
7

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

8020210gye0008020210cm300

Tabla de contenido