boso medicusex clusive Manual Del Usuario página 64

Preparing to measure your blood pressure
2-3 cm
EN
Do not attach the cuff over wounds as
this can cause further injuries.
Ensure that the cuff is not attached to
an arm where arteries or veins are under-
going or have undergone medical treat-
ment (e.g. shunt).
For women who have had a breast
amputated, do not attach the cuff to the
arm on the amputated side of the body.
64
Marking
Artery
Illustration 3
Other medical devices being used on
the same arm at the same time may mal-
function during measurement.
The cuff must not be too tight. There
1
should be enough space to fit roughly two
fingers between arm and cuff.
The metal ring should never lie over
the artery (see illustration 3) as this may
produce a false reading.
¬ Grasp the end of the cuff that feeds
though the metal ring and wrap it
around the outside of your arm. Attach
the Velcro fastener by applying gentle
pressure.