Key To Symbols Used; Description Of The Appliance And Accessories; Preparation - Imetec P8401 Instrucciones De Uso

Caution/Warning/Danger
Warning! Hot surface
Position with 1 dot. Suitable
for ironing silk and synthetic
fabrics such as: viscose,
polyester
Position with 3 dots.
Suitable for ironing fabrics
such as cotton and linen
Max fill-up level
ON position

DESCRIPTION OF THE APPLIANCE AND ACCESSORIES

Refer to the illustrative guide on page I to check that your appliance is complete with all accessories.
1. Water fill cover
2. Filter hatch
3. Reservoir
4. Cable recess
5. ON/OFF switch
6. Technical data
7. Power cable with plug
8. Filter change LED
9. Filter change reset button
Open the filter hatch (2).
Make sure the filter (already inserted) is pushed right down into its seat.
Closes the filter hatch (2).
NOTE: when using for the first time, or whenever the filter is replaced, a slight buzz will
be heard when the steam button (17) is pressed, and no steam will be produced.
This is absolutely normal and is linked to the filling of the filter. Hold the steam button (17)
pressed until the buzzing disappears and the iron begins to deliver steam.
Sort the laundry according to the international symbols shown on the label; if this is missing, sort
according to the type of material.
Start by ironing the garments that require the lowest temperature.

KEY TO SYMBOLS USED

10. Steam adjustment knob
11. Steam ready LED
12. Iron support mat
13. Temperature adjustment knob
14. Mono-tube
15. Plate temperature LED
16. Plate
17. Steam button
18. Filter (x3)

PREPARATION

OFF position
Forbidden
Information
Position with 2 dots.
Suitable for ironing fabrics
such as wool
Tank filling
Steam ready/steam
14
EN