Use; Filling The Tank; Selecting The Temperature; Ironing With Steam - Imetec P8401 Instrucciones De Uso

WARNING! This appliance is not to be used if it has been
EN
dropped, if there are visible signs of damage or if it is leaking
water.
WARNING! DO NOT pour diluting agents, scented liquids or
descaling agents into the reservoir as the use of these
substances can damage the product.
WARNING! Do not use water from dryers, air-conditioners or
tumble dryers, filtered water with water softeners, or rainwater.
The reservoir may contain some water as each product is tested before being put on the market.

FILLING THE TANK

Check that the power supply cable with plug (7) is plugged into the socket.
Open the water fill cover (1).
Pour water into the tank (3) very slowly to avoid overflowing.
Do not exceed the max fill-up level indicated.
Close the water fill cover (1).

SELECTING THE TEMPERATURE

Plug the power supply cable with plug (7) into the socket.
Turn the ON/OFF switch (5) to ON.
The "steam ready" light (11) will flash, indicating that the product is heating up.
Set the temperature according to the type of fabric in line with the international symbols shown on the
labels; using the adjustment knob (13).
The plate temperature control LED (15) indicates that the iron is warming up.
Wait for the "steam ready" (11) light to stop flashing, and the plate temperature control LED (15) to go
off, before starting to iron.
It is recommended that you place a cloth between the iron and the fabric when using the iron
for the first time.
Before starting ironing, direct a jet of steam onto the cloth by lifting the iron slightly so that any
residual condensation comes out.
Fabrics with the following symbols may not be ironed:

IRONING WITH STEAM

NOTE: steam must only be used from the 3-dot temperature position upwards
Turn the steam adjustment knob (10) to one of the 5 positions ranging from ECO-MIN (minimum steam)
to MAX (maximum steam).
Press the steam button (17) to iron with steam.
The soleplate temperature LED flashes intermittently while ironing, thereby indicating that the
selected temperature is maintained.
15

USE

.