Key To Symbols - Imetec ZEROCALC PRO 2200 Instrucciones Para El Uso

• The appliance must not be left unattended when it is connected to
the power mains.
• Always disconnect the appliance from the mains supply before
EN
cleaning or performing maintenance and when the appliance is
not in use.
• If the appliance is faulty or malfunctions, switch it off and do
not tamper with it. Any repairs must only be carried out by an
authorised technical service centre.
• If the power cable is damaged it must be replaced by an authorised
technical service centre, so as to prevent all risks.
• The electrical safety of this appliance is only guaranteed when it
is connected correctly to an effective earthing system as required
by applicable electrical safety standards. This fundamental safety
requirement must be verified before connecting the appliance to
the power mains. In case of doubt request an accurate check of the
system by a skilled technician.
• DO NOT place this appliance in water.
• DO NOT leave this appliance in contact with fabrics and surfaces
that are easily flammable or might be damaged by heat.
• This appliance must be used and rested on a stable surface.
• When placing the iron on its rest, ensure the surface on which the
rest is placed is stable.
• The iron must not be used if it has been dropped, if there is visible
damage or if it leaks water.
• DO NOT use chemical additives, scented substances or descaling
agents.
• The plug must be unplugged before the reservoir is filled.
• For the appliance features, refer to the external packaging.
• Only use with the accessories supplied, which are an integral part
of the appliance.
Warning
Hot surface
12
SYMBOLS
Prohibited
Note