Reassembling Your Axiom Cushion After Cleaning - Etac Ki Mobility AXIOM AS Manual De Instrucciones

D. Reassembling Your Axiom Cushion After Cleaning
WARNING: Place the Axiom AS and Axiom ASP fluid insert into the well of the cushion
base ensuring position is aligned. A misalignment or creation of an edge could cause an
unwanted pressure point, which could lead to injury.
1. After Proper Cleaning and Maintenance
a. Install the trochanteric fluid inserts by mating the hook and loop closure sections
from the fluid insert onto the hook and loop closure of the foam base as shown in
image below.
b. Install the ischial fluid insert by mating the hook and loop closure sections from the
fluid insert onto the hook and loop closure of the foam base as show in image below.
c. Reinstall the reservoir plugs so that the end of the plug is flush with the front of the
cushion.
2. Install base with fluid insert into the outer cover.
3. Close the zipper on your cushion ensuring that the zipper-pull ends up closed with the pull
tucked into the zipper pocket in the cover.
11