Disassembly - Klarstein TRIFECTA Manual De Instrucciones

EN
54

DISASSEMBLY

Note: Installation/assembly and disassembly of the unit must only be carried out by
qualified personnel.
Before dismantling, any gas in the unit must be vented. Proceed as follows:
• Close all supply valves, but do not disconnect the gas cooker from the line yet.
• Now light all the burners. The remaining gas contained in the appliance burns off in
a short time.
• After that, the appliance's pipes are free of gas and the gas cooker can be discon-
nected from the connections.
Important notes on dismantling the unit
• The disassembly is the same as the installation/assembly in the reverse order of the
steps.
• Have a second person help you during disassembly to avoid injury.
• Ensure sufficient ventilation of the working area during disassembly.
• There are no motors or accumulators in this gas hob. Observe the section "Disposal
Considerations".