4
Setting Menu (Continued)
Install. > Menu Display
X
Menu Display
Sets the duration for displaying the menu.
15 sec
On
Install. > Line Display
a
Line Display
Sets whether to display the input when switching input.
5 sec
Off
Install. > Flip H
b
Flip H
Select this when the image is projected from the back of the screen or when the projector is hung from the ceiling.
On
Off
Install. > Flip V
c
Flip V
Select this when the projector is hung from the ceiling.
On
Off
Install. > High Altitude Mode
d
High Altitude Mode
Select this when using the projector in a location of low atmospheric pressure (higher than 900 meters above sea level).
On
Off
Func. > Back Color
e
Back Color
Configures the screen color displayed when there is no input signal.
Blue
Black
Func. > Sleep Timer
f
Sleep Timer
Sets the lapse time before automatically switching to the standby mode when there is no input signal.
15
30
60
Off
30
Settings
Displays for 15 seconds.
Always display.
Displays for 5 seconds.
Do not display.
Flips image to the left or right.
Do not flip image to the left or right.
Flips image up or down.
Do not flip image up or down.
Activate.
Do not activate.
Sets screen color to "Blue".
Sets screen color to "Black".
Switch to standby mode after 15 minutes.
Switch to standby mode after 30 minutes.
Switch to standby mode after 60 minutes.
Do not switch to standby mode.