PROBLEM
7.
Sliding door tends to
open/close
8. CE INFORMATION
The CE label is located on the appliance. This label contains technical data and OF number. (This number can also
be found in the guarantee).
THIS NUMBER IS ESSENTIAL FOR ORDERING SPARE PARTS.
The review of the appliance, the installation and ducts must be carried out by a professional.
In case of doubt regarding the described herein, please contact your Rocal dealer.
WARNING:
-
All tests are carried out in observance of Regulationsm UNE-EN 13229:2002 - UNE-EN 13229:2002/A2:2005 -
UNE-EN 13229:2002/AC:2006– UNE-EN 3229:2002/A2:2005/AC:2007
-
The review of the equipment, the installation and ducts must be carried out by a professional.
-
In case of doubt regarding the described herein, please contact your Rocal dealer.
-
FAILURE TO COMPLY WITH THE OBLIGATIONS DESCRIBED HEREIN OR IMPROPER HANDLING OF THE
EQUIPMENT SHALL EXONERATE THE MANUFACTURER OF ANY LIABILITY.
CAUSE
Sliding door tends to open need to adjust
counterweight
Sliding door tends to close need to adjust
counterweight
SOLUTION
-Add counterweights, follow the steps described in
images D.2 and D.10.
-Remove counterweights, follow the steps described in
images D.2 and D.9
14