Connecting To Wifi; Emptying The Water Tank - ProBreeze PB-15 Manual De Instrucciones

Ocultar thumbs Ver también para PB-15:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 57

CONNECTING TO WIFI

Note: if you are having issues connecting to Wifi, please ensure your network is set to 2.4G.
If you are continuing to have issues, please contact our customer care team by emailing
help@probreeze.com
To connect to Wifi, hold the filter button down for 3 seconds, or until the LED display
shows "AP" (auto-pairing). When in auto-pairing, the compressor will be forced off.
Download the "NetHome plus" app, select "add device" and then select "dehumidifier".
Follow the instructions. All instructions can also be found in the App User Manual
included with this unit.
If the connection is successful within 8 minutes of entering AP mode, the device will resume.
If the connection is unsuccessful after 8 minutes of entering AP mode, the device
will resume.
Once connected, you can view performance and control your dehumidifier through the app.

EMPTYING THE WATER TANK

Caution
Always turn the unit off and remove the plug from the wall outlet before removing the
water tank.
Do not transport the unit with water in the water tank. This may cause the unit to tip over
or the water to spill.
Be careful when removing the water tank from the unit to avoid spilling water.
When you remove the water tank, do not touch any parts inside the unit. Doing so may
damage the product.
If there is water anywhere else in the unit when the water tank is removed, clean with a
dry cloth.
Once connected, you can view performance and control your dehumidifier through the
app.
Instructions
If the unit is on and the water tank is full, the compressor and fan will turn off and the
"full" light will illuminate.
To empty the water tank, slowly pull it out a little to loosen.
Hold both sides of the water tank with two hands, and even strength, and pull it from the
unit. Do not put the water tank on the floor as the base is uneven.
Throw the water away in a safe place and replace the water tank. Ensure this is done
gently, all the way into the unit, as forcing the water tank in may cause damage.
English | 8

Publicidad

Tabla de contenido
loading

Tabla de contenido