Positioning The Unit - ProBreeze PB-15 Manual De Instrucciones

Ocultar thumbs Ver también para PB-15:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 57
ACCESSORIES
The following accessories can be found in the water tank. Remove and install before use (as
per instructions listed below).
Female threaded end
power cord buckle

POSITIONING THE UNIT

This unit is designed to operate in temperatures between 5
30% and 50% RH (relative humidity).
Place the unit in an area where the temperature will not fall below 5
below 5
c, the coils may freeze; leading to a reduction in performance.
º
Place the unit on a smooth, level surface, strong enough to support the unit with a full
water tank.
Allow at least 50cm of space behind the air outlet (at the back of the unit) for good
air circulation. Allow at least 20cm of space on all other sides of the unit for good air
circulation.
Place the unit away from a clothes dryer, heater or radiator.
For best results, place the unit in an enclosed space and close all doors windows and
outside openings.
If placed near an enclosed storage area (like a wardrobe or cupboard), ensure there is
adequate circulation of air.
Do not use outdoors.
This unit is intended for indoor residential use only. It should not be used for commercial
or industrial applications.
5 | English
continuous drainage hose
To install the power cord buckle,
simply insert into the back of the unit
c and 32
c, and between a
º
º
c. In temperatures
º

Publicidad

Tabla de contenido
loading

Tabla de contenido