Troubleshooting Table; Declaration Of Conformity - Worx WG322E Manual Original

TROUBLESHOOTING TABLE

The following table gives checks and actions that you can perform if your machine does not operate correctly. If these do not
identify/remedy the problem, contact your service agent. WARNING: Switch off and remove plug from power source
before investigating fault.
Symptom
Chain saw fails to
operate
Chain saw
operates
intermittently
Dry chain
Chain/chain bar
over-heats
Chain saw rips,
vibrates, does not
saw properly
22
DECLARATION OF
CONFORMITY
We,
Positec Germany GmbH
Grüner Weg 10, 50825 Cologne, Germany
Declare that the product
Description Battery-powered chain saw and pole saw
Type WG322E WG322E.1 WG322E.9 WG323E WG323E.9
(3 - designation of machinery, representative of chain
saw and pole saw)
Function Cutting wood
Complies with the following Directives:
2006/42/EC
2014/30/EU
2011/65/EU&(EU)2015/863
2000/14/EC amended by 2005/88/EC
The notified body involved
Name: Intertek Deutschland GmbH (Notified body
0905)
Address: Stangenstraße 1, 70771 LEINFELDEN-
ECHTERDINGEN
Certification No.: 17SHW1086-01 (WG322E WG322E.1
WG322E.9) 17SHW1166-01 (WG323E WG323E.9)
WG322E WG322E.1 WG322E.9
2000/14/EC amended by 2005/88/EC:
- Conformity Assessment Procedure as per Annex V
Cordless Chain Saw
Possible Cause
Out of battery.
Fuse faulty.
Over heating
Applying too much pressure while cutting.
Loose connection.
Internal wiring defective.
On/Off switch defective.
No oil in reservoir
Vent in oil filler cap clogged
Oil passage clogged
No oil in reservoir
Vent in oil filler cap clogged
Oil passage clogged
Chain is over tensioned
Dull chain
Chain tension too loose
Dull chain
Chain worn out
Chain teeth are facing in the wrong
direction
Charge the battery pack.
Replace fuse.
Place the machine in a cool, ventilated place to
cool it down.
Applying relatively less pressure while cutting.
Contact service agent.
Contact service agent.
Contact service agent.
Refill oil
Clean cap
Clean oil passage outlet
Refill oil
Clean cap
Clean oil passage outlet
Adjust chain tension
Sharpen chain or replace
Adjust chain tension
Sharpen chain or replace
Replace chain
Reassemble with chain in correct
direction
- Measured Sound Power Level 94.7 dB(A)
- Declared Guaranteed Sound Power Level 96 dB(A)
WG323E WG323E.9
2000/14/EC amended by 2005/88/EC:
- Conformity Assessment Procedure as per Annex V
- Measured Sound Power Level 95.2 dB(A)
- Declared Guaranteed Sound Power Level 96 dB(A)
Standards conform to
EN 60745-1 EN 60745-2-13
EN ISO 3744 EN 55014-1
EN 55014-2 Parts of EN ISO11680-1
The person authorized to compile the technical file,
Name Marcel Filz
Address Positec Germany GmbH
Grüner Weg 10, 50825 Cologne, Germany
2020/04/22
Allen Ding
Deputy Chief Engineer, Testing & Certification
Positec Technology (China) Co., Ltd.
18, Dongwang Road, Suzhou Industrial
Park, Jiangsu 215123, P. R. China
Remedy
EN