Intended Use; Safety Informations - BGS technic 70114 Manual De Instrucciones

TOOLS
1 Camshaft timing tool holder
2 Fixing screws
3 Camshaft timing tool
4 Camshaft timing tool
5 Fixing screws
6 Crankshaft setting pin
7 Timing chain pre-tensioning tool
8 Cylinder head bit socket
9 Special wrench
10 Crankshaft turning tool
11 Crankshaft setting pin adapter
12 Camshaft timing tool
13 Camshaft timing tool

INTENDED USE

This tool set is used for setting and checking the engine timing.
The included tools are suitable for BMW engines with engine codes B38, B48 and B58.
More information regarding this item and a list of suitable engines and models can be found on our
website: www.bgstechnic.com

SAFETY INFORMATIONS


Do not use the tool if parts are missing or damaged.

Use the tool for the intended purpose only.

Never place the tool on the vehicle battery. There is a risk of a short circuit.

Be careful when working on running engines. Loose clothing, tools and other objects can be
caught by rotating parts and cause serious injury.

Keep children and other unauthorized persons away from the work area.

Do not allow children to play with the tool or its packaging.

Be careful when working on hot engines because of the risk of burn injuries.

If you remove the ignition key before repairing, you can prevent the engine from being started
accidentally and resulting in engine damage.

These instructions are provided as a guide only and does not replace a workshop manual.
Always refer to the vehicle-specific service literature, particularly the technical data such as
torque values and instructions for disassembly/assembly, etc.

After repair or before starting the engine, turn a minimum of 2 turns by hand and check the
timing again.

Turn the engine only in the normal direction of rotation (clockwise unless otherwise specified)

Do not use locking tools for camshaft and crankshaft as a counter-holder, during loosening or
tightening screws on pulleys, camshafts or crankshafts. This can damage tools and engine
components. Only use tools that are suitable for this purpose.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Engine Timing Tool Set
for BMW B38, B48, B58
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 70114
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed