Lubricating The Seals; Specifications - Stihl RE 90.0 Manual De Instrucciones

English
Fault
The shape of the
water jet has chan‐
ged.
Detergent additive is
not being drawn in.
Connections with
pressure washer,
high-pressure hose,
spray gun or spray
lance are stiff.
17.2

Lubricating the seals

1
1
► Grease the seals (1) with grease for fittings.

18 Specifications

18.1 STIHL RE 90.0 high-pressure
washer
Version 100 V / 50-60 Hz
– Fuse (characteristic "C" or "K"): 15 A
– Power consumption: 1.4 kW
– Electrical protection class: II
– Degree of of electrical protection: IPX5
– Working pressure (p): 6.7 MPa (67 bar)
– Max. permissible pressure (p max.): 10 MPa
(100 bar)
– Max. water supply pressure (p in max.): 1 MPa
(10 bar)
– Max. water throughput (Q max.): 7.5 l/min
(450 l/h)
– Minimum water throughput (Q min.): 5.4 l/min
(320 l/h)
– Max. suction lift: 0.5 m
– Max. water temperature in pressure mode
(t in max): 40 °C
– Max. water temperature in suction mode:
20 °C
– sample inspection
– Length: 340 mm
– Width: 320 mm
– Height: 880 mm
42
Cause
The nozzle is blocked.
The nozzle is worn.
The container is empty.
The nozzle of the spraying set is
blocked.
The gaskets of the connections have
not been greased.
1
Remedy
► Clean the nozzle.
► Fit a new nozzle.
► Fill container with detergent.
► Clean nozzle of spraying set.
► Lubricate the gaskets.
– Length of high-pressure hose: 6 m
– Weight (m) with accessory attached: 8 kg
Version 127 V / 60 Hz
– Fuse (characteristic "C" or "K"): 15 A
– Power consumption: 1.5 kW
– Electrical protection class: II
– Degree of of electrical protection: IPX5
– Working pressure (p): 7.2 MPa (72 bar)
– Max. permissible pressure (p max.): 10 MPa
(100 bar)
– Max. water supply pressure (p in max.): 1 MPa
(10 bar)
– Max. water throughput (Q max.): 7.5 l/min
(450 l/h)
– Minimum water throughput (Q min.): 5.5 l/min
(330 l/h)
– Max. suction lift: 0.5 m
– Max. water temperature in pressure mode
(t in max): 40 °C
– Max. water temperature in suction mode:
20 °C
– sample inspection
– Length: 340 mm
– Width: 320 mm
– Height: 880 mm
– Length of high-pressure hose: 6 m
– Weight (m) with accessory attached: 8 kg
Version 120 V - 127 V / 60 Hz
– Fuse (characteristic "C" or "K"): 15 A
– Power consumption: 1.5 kW
– Electrical protection class: II
– Degree of of electrical protection: IPX5
– Working pressure (p): 7.2 MPa (72 bar)
– Max. permissible pressure (p max.): 10 MPa
(100 bar)
– Max. water supply pressure (p in max.): 1 MPa
(10 bar)
– Max. water throughput (Q max.): 7.2 l/min
(430 l/h)
18 Specifications
17.2
0458-002-9821-B