Additional Safety Warnings - MIRKA AOS-B 130NV Instrucciones De Manejo

Ocultar thumbs Ver también para AOS-B 130NV:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 266

Additional Safety Warnings

Always ensure that the work piece to be sanded is firmly fixed in place.
Always remove battery during any transportation of the tool.
Do not allow the tool to free speed without taking precautions to protect surrounding people and objects in the event
that the abrasive or backing pad should come loose.
Read all instructions before using this tool. All operators must be fully trained in the proper, safe use of this tool.
All maintenance must be carried out by trained personnel. For service, contact a Mirka authorized service center.
If the tool appears to malfunction, stop using it immediately and arrange for service and repair.
Before changing the abrasive always disconnect the power source
Never carry, store or leave the tool unattended with the power source connected.
Keep hands clear of the spinning pad during use.
Always wear required personal safety protection in accordance with manufacturer s instructions and local/national
standards while using this tool.
Read the Materials Safety Data Sheet (MSDS) for the working surface.
If any physical hand/wrist discomfort is experienced, stop working and seek medical attention. Hand, wrist and arm
injury may result from repetitive work, motion and overexposure to vibrations.
Additional information on battery and charger
Never attempt to open the battery pack for any reason. If the plastic housing of the battery pack breaks or cracks,
immediately discontinue use and do not recharge.
Technical data
®
Mirka
AOS-B 130NV
Voltage
10.8 VDC
Speed
4000 8000 rpm
Orbit
3 mm (1/8")
Size of backing
Ø 32 mm (1 1/4")
pad
Weight (incl. bat-
0.57 kg (1.3 lbs)
tery)
Battery charger
Input
Charging time
Storage temperature
range
Charging temperature
Dimension
Weight
Degree of protection
Battery pack
Type
Battery voltge
Capacity
Weight
Mirka BCA 108
100 240 VAC , 50 60Hz
< 50 min (2.5 Ah)
< 100 min (5.0 Ah)
-20 °C 80 °C (-4 °F 176 °F)
4 °C 40 °C (39 °F 104 °F)
191 x 102 x 86 mm
(7 1/2 x 4 x 3 3/8")
0.66 kg (1.5 lbs)
II /
Mirka BPA 10825
Rechargeable
Li-ion 3INR19/65
10.8 VDC
2.5 Ah / 27.0 Wh
0.18 kg (0.4 lbs)
AROS-B 150NV
10.8 VDC
4000 8000 rpm
5 mm (3/16")
Ø 32 mm (1 1/4")
0.56 kg (1.2 lbs)
Mirka BPA 10850
Rechargeable
Li-ion 3INR19/65-2
10.8 VDC
5.0 Ah / 54.0 Wh
0.38 kg (0.8 lbs)
Mirka® AOS-B 130NV & AROS-B 150NV
en | us-ca
261

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Aros-b 150nv89911503128991230312

Tabla de contenido